Sierra-video SCP-20 User Manual

SIERRA VIDEO SCP-20 Control Panel 804020 Us

SIERRA VIDEO 4 Factors Affecting Quality of Results There are many factors affecting the quality of results when signals are transmitted from

SCP-20 5 SCP Control Panel Family Overview The SCP line of control panels requires switcher software version 7.xxx or newer for programming

SIERRA VIDEO 7 Installation Introduction The following steps should be completed before applying power to the control panel. It is very

SIERRA VIDEO 8 DIP switch settings Your control panel has been configured at the factory for the settings you are most likely to need. Howeve

SCP-20 9 The RS-485 Network Once the panels DIP switch settings are compatible with the system (i.e. each panel has its own unique ID number), t

SIERRA VIDEO 10 Programming The Sierra Video TyLinx Pro or MediaNav software programs are used to setup the output(s) and level of the contro

SIERRA VIDEO 11Warranty A. General Buyer assumes all responsibility for ascertaining the suitability of Sierra Video (hereinafter "S

SIERRA VIDEO 12 THIS LIMITED WARRANTY IS EXPRESSED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITAT

SCP-20 CONTROL PANEL User’s Manual  Sierra Video P.O. Box 2462 Grass Valley, CA 95945 Tel: (530) 478-1000 Fax: (530) 478-1105 Email: inf

Contents - 1 Table of Contents Introduction 1Before You Begin 1 Warnings & Safety Regulations 2 Warnings 2 Cautions 2 Cautions (con

SIERRA VIDEO 1 Introduction Before You Begin There are several terms and acronyms that you should become familiar with before reading this manual

SIERRA VIDEO 2 Warnings & Safety Regulations The information in the following section provides important warnings and safety guidelines f

SCP-20 3 Cautions (continued)  Leave the side, top, and bottom of the frame clear for air convection cooling and to allow room for cabling.