ADC-142 Owner’s Manual •
••
• (V 2.1) Page 21 of 29
Menu Item Format Description
Video Signal
Controls
SD Input Type
Composite Selects the format of
input SD analog video, so
the decoder can properly
decode the signal.
Y/C
YPbPr BetaCam
YPbPr MII
YPbPr SMPTE
HD Input Type
GBR Selects the format of
input HD analog video.
YPbPr
SD Composite
Contains
0.0 or 7.5 IRE of Setup
Specifies the amount of
setup (pedestal) in the
input video. It will be
removed by the decoder.
Menu Item Format Description
AES Input
Controls
AES Pair 1-8 SRC
Bypass
On
This will bypass sample
rate conversion on AES.
If bypassed AES rate
must match input video
rate or audio dropout will
occur. SRC must be
bypassed to embed Dolby
encoded audio.
Off
AES Pair 1-8
Passthrough
On
AES output pair X will
be a low latency copy of
AES input pair X.
Off
AES Pair 1-8
Zero Delay
On
Embeds with low (<1 ms)
latency. Overrides routing
choices.
Off
Menu Item Format Description
Video Proc
Video Gain
Range 0-2000 Gain applied to Y (Luma).
1000 is unity.
Video Lift
Range (-999) – 999 Lift applied to Y (Luma),
in 10 bit code value.
Color Gain Range 0-2000
Gain applied to C
(Chroma). 1000 is unity.
Color Phase Range (–360) – 360
Phase of C (Chroma) in
degrees.
Reset to Unity Confirm
Resets all of the proc
controls to unity.
Comments to this Manuals